WDC WD800JD-55MSA1-10-01E01-WD-WMAM9CLC8458-701335-006-109KE-533-0-1

Sunny · 发表于 2016-12-23 13:22:01

WDC WD800JD-55MSA1-10-01E01-WD-WMAM9CLC8458-701335-006-109KE-533-0-1
PCB 2060-701335-006 REVA

Techno mode key
Techno mode key......................... : Ok
RAM:
HDD Info reading........................ : Ok
Heads number............................ : 2
Cyl Count............................... : 64
Zone allocation table................... : Ok
SA SPT.................................. : 533
ROM:
Read ROM................................ : Ok
ROM Data size........................... : 128 Kb
ROM Modules:
ROM version............................. : 10.9KE
ROM F/W version......................... : 109KE
Overlay F/W version..................... : 10.9KE
Servo F/W version....................... : 02.8D
Heads configuration..................... : by map
Heads number............................ : 2
Heads number in use..................... : 2
Switched off heads...................... : No
Heads map............................... : 0,1
Service area:
Permanent overlay....................... : Loaded
SA dir reading (ID)..................... : Ok (Copy 0)
Configuration reading................... : Ok
Master Password......................... : has not been set
User Password........................... : has not been set
HDD resources backup
HDD info report......................... : Ok
Read ROM
Into file............................... : <HDD Profile>\Data\SABackup\ROM\ROM_10-9KE_10-9KE_02-8D.bin
ROM Data size........................... : 128 Kb
Ok
Read ROM modules
Into file............................... : <HDD Profile>\Data\SABackup\ROM
Module : 0A............................. : Ok
Module : 0D............................. : Ok
Module : 30............................. : Ok
Module : 47............................. : Ok
Reading modules
Into folder............................. : <HDD Profile>\Data\SABackup\Modules\
Reading method.......................... : Selected copies
Module 01 Copy 0........................ : Ok
Module 01 Copy 1........................ : Ok
Module 26 Copy 0........................ : Ok
Module 26 Copy 1........................ : Ok
Module 1C Copy 0........................ : Ok
Module 1C Copy 1........................ : Ok
Module 43 Copy 0........................ : Ok
Module 43 Copy 1........................ : Ok
Module 04 Copy 0........................ : Ok
Module 04 Copy 1........................ : Ok
Module 0C Copy 0........................ : Ok
Module 0C Copy 1........................ : Ok
Module 53 Copy 0........................ : Ok
Module 53 Copy 1........................ : Ok
Module 35 Copy 0........................ : Ok
Module 35 Copy 1........................ : Ok
Module 02 Copy 0........................ : Ok
Module 02 Copy 1........................ : Ok
Module 33 Copy 0........................ : Ok
Module 33 Copy 1........................ : Ok
Module 1B Copy 0........................ : Ok
Module 1B Copy 1........................ : Ok
Module 19 Copy 0........................ : Ok
Module 19 Copy 1........................ : Ok
Module 42 Copy 0........................ : Ok
Module 42 Copy 1........................ : Ok
Module 07 Copy 0........................ : Ok
Module 07 Copy 1........................ : Ok
Module 4A Copy 0........................ : Ok
Module 4A Copy 1........................ : Ok
Module 37 Copy 0........................ : Ok
Module 37 Copy 1........................ : Ok
Module 2D Copy 0........................ : Ok
Module 2D Copy 1........................ : Ok
Module 24 Copy 0........................ : Ok
Module 24 Copy 1........................ : Ok
Module 1E Copy 0........................ : Ok
Module 1E Copy 1........................ : Ok
Module 40 Copy 0........................ : Ok
Module 40 Copy 1........................ : Ok
Module 05 Copy 0........................ : Ok
Module 05 Copy 1........................ : Ok
Module 49 Copy 0........................ : Ok
Module 49 Copy 1........................ : Ok
Module 62 Copy 0........................ : Ok
Module 62 Copy 1........................ : Ok
Module 11 Copy 0........................ : Ok
Module 11 Copy 1........................ : Ok
Module 21 Copy 0........................ : Ok
Module 21 Copy 1........................ : Ok
Module 61 Copy 0........................ : Ok
Module 61 Copy 1........................ : Ok
Module 39 Copy 0........................ : Ok
Module 39 Copy 1........................ : Ok
Module 32 Copy 0........................ : Ok
Module 32 Copy 1........................ : Ok
Module 36 Copy 0........................ : Ok
Module 36 Copy 1........................ : Ok
Module 25 Copy 0........................ : Ok
Module 25 Copy 1........................ : Ok
Module 22 Copy 0........................ : Ok
Module 22 Copy 1........................ : Ok
Module 15 Copy 0........................ : Ok
Module 15 Copy 1........................ : Ok
Module 28 Copy 0........................ : Ok
Module 28 Copy 1........................ : Ok
Module 2F Copy 0........................ : Ok
Module 2F Copy 1........................ : Ok
Module 50 Copy 0........................ : Ok
Module 50 Copy 1........................ : Ok
Module 38 Copy 0........................ : Ok
Module 38 Copy 1........................ : Ok
Module 23 Copy 0........................ : Ok
Module 23 Copy 1........................ : Ok
Module 41 Copy 0........................ : Ok
Module 41 Copy 1........................ : Ok
Module 34 Copy 0........................ : Ok
Module 34 Copy 1........................ : Ok
Module 29 Copy 0........................ : Ok
Module 29 Copy 1........................ : Ok
Module 51 Copy 0........................ : Ok
Module 51 Copy 1........................ : Ok
Module 31 Copy 0........................ : Ok
Module 31 Copy 1........................ : Ok
Module 17 Copy 0........................ : Ok
Module 17 Copy 1........................ : Ok
Module 4C Copy 0........................ : Ok
Module 4C Copy 1........................ : Ok
Module 06 Copy 0........................ : Ok
Module 06 Copy 1........................ : Ok
Module 2A Copy 0........................ : Ok
Module 2A Copy 1........................ : Ok
Module 52 Copy 0........................ : Ok
Module 52 Copy 1........................ : Ok
Module C4 Copy 0........................ : Ok
Module C4 Copy 1........................ : Ok
Module C5 Copy 0........................ : Ok
Module C5 Copy 1........................ : Ok
Module CC Copy 0........................ : Ok
Module CC Copy 1........................ : Ok
Module CA Copy 0........................ : Ok
Module CA Copy 1........................ : Ok
Module CB Copy 0........................ : Ok
Module CB Copy 1........................ : Ok
Module CD Copy 0........................ : Ok
Module CD Copy 1........................ : Ok
Module CF Copy 0........................ : Ok
Module CF Copy 1........................ : Ok
Module CE Copy 0........................ : Ok
Module CE Copy 1........................ : Ok
Module 91 Copy 0........................ : Ok
Module 91 Copy 1........................ : Ok
Module 92 Copy 0........................ : Ok
Module 92 Copy 1........................ : Ok
Module 93 Copy 0........................ : Ok
Module 93 Copy 1........................ : Ok
Module C1 Copy 0........................ : Ok
Module C1 Copy 1........................ : Ok
Module C2 Copy 0........................ : Ok
Module C2 Copy 1........................ : Ok
Module C7 Copy 0........................ : Ok
Module C7 Copy 1........................ : Ok
Module 9E Copy 0........................ : Ok
Module 9E Copy 1........................ : Ok
Module B1 Copy 0........................ : Ok
Module B1 Copy 1........................ : Ok
Module E0 Copy 0........................ : Ok
Module E0 Copy 1........................ : Ok
Module E8 Copy 0........................ : Ok
Module E8 Copy 1........................ : Ok
Module FE Copy 0........................ : Ok
Module FE Copy 1........................ : Ok
Module D5 Copy 0........................ : Ok
Module D5 Copy 1........................ : Ok
Module DA Copy 0........................ : Ok
Module DA Copy 1........................ : Ok
Module DB Copy 0........................ : Ok
Module DB Copy 1........................ : Ok
Module DF Copy 0........................ : Ok
Module DF Copy 1........................ : Ok
Module DD Copy 0........................ : Ok
Module DD Copy 1........................ : Ok
Module D6 Copy 0........................ : Ok
Module D6 Copy 1........................ : Ok
Module D7 Copy 0........................ : Ok
Module D7 Copy 1........................ : Ok
Module D2 Copy 0........................ : Ok
Module D2 Copy 1........................ : Ok
Module BB Copy 0........................ : Ok
Module BB Copy 1........................ : Ok
Module D9 Copy 0........................ : Ok
Module D9 Copy 1........................ : Ok
Module D4 Copy 0........................ : Ok
Module D4 Copy 1........................ : Ok
Module DC Copy 0........................ : Ok
Module DC Copy 1........................ : Ok
Module D0 Copy 0........................ : Ok
Module D0 Copy 1........................ : Ok
Module D3 Copy 0........................ : Ok
Module D3 Copy 1........................ : Ok
Module BA Copy 0........................ : Ok
Module BA Copy 1........................ : Ok
Module B9 Copy 0........................ : Ok
Module B9 Copy 1........................ : Ok
Module BC Copy 0........................ : Ok
Module BC Copy 1........................ : Ok
Module FD Copy 0........................ : Ok
Module FD Copy 1........................ : Ok
Module FB Copy 0........................ : Ok
Module FB Copy 1........................ : Ok
Module E6 Copy 0........................ : Ok
Module E6 Copy 1........................ : Ok
Module E7 Copy 0........................ : Ok
Module E7 Copy 1........................ : Ok
Module BE Copy 0........................ : Ok
Module BE Copy 1........................ : Ok
Module B8 Copy 0........................ : Ok
Module B8 Copy 1........................ : Ok
Module BF Copy 0........................ : Ok
Module BF Copy 1........................ : Ok
Module FC Copy 0........................ : Ok
Module FC Copy 1........................ : Ok
Module EE Copy 0........................ : Ok
Module EE Copy 1........................ : Ok
Module E1 Copy 0........................ : Ok
Module E1 Copy 1........................ : Ok
Module E2 Copy 0........................ : Ok
Module E2 Copy 1........................ : Ok
Module E3 Copy 0........................ : Ok
Module E3 Copy 1........................ : Ok
Module E4 Copy 0........................ : Ok
Module E4 Copy 1........................ : Ok
Module E5 Copy 0........................ : Ok
Module E5 Copy 1........................ : Ok
Module E9 Copy 0........................ : Ok
Module E9 Copy 1........................ : Ok
Module DE Copy 0........................ : Ok
Module DE Copy 1........................ : Ok
Module FA Copy 0........................ : Ok
Module FA Copy 1........................ : Ok
Reading service tracks
Into folder............................. : <HDD Profile>\Data\SABackup\Tracks
Reading heads........................... : 0
Cyl -1; Head 0.......................... : Ok
Cyl -2; Head 0.......................... : Ok
Cyl -3; Head 0.......................... : Ok
Cyl -4; Head 0.......................... : Ok
Cyl -5; Head 0.......................... : Ok
Cyl -6; Head 0.......................... : Ok
Cyl -7; Head 0.......................... : Ok
Cyl -8; Head 0.......................... : Ok
Cyl -9; Head 0.......................... : Ok
Cyl -10; Head 0......................... : Ok
Cyl -11; Head 0......................... : Ok
Cyl -12; Head 0......................... : Ok
Cyl -13; Head 0......................... : Ok
Cyl -14; Head 0......................... : Ok
Cyl -15; Head 0......................... : Ok
Cyl -16; Head 0......................... : Ok
Cyl -17; Head 0......................... : Ok
Cyl -18; Head 0......................... : Ok
Cyl -19; Head 0......................... : Ok
Cyl -20; Head 0......................... : Ok
Cyl -21; Head 0......................... : Ok
Cyl -22; Head 0......................... : Ok
Cyl -23; Head 0......................... : Ok
Cyl -24; Head 0......................... : Ok
Cyl -25; Head 0......................... : Ok
Cyl -26; Head 0......................... : Ok
Cyl -27; Head 0......................... : Ok
Cyl -28; Head 0......................... : Ok
Cyl -29; Head 0......................... : Ok
Cyl -30; Head 0......................... : Ok
Cyl -31; Head 0......................... : Ok
Cyl -32; Head 0......................... : Ok
Cyl -33; Head 0......................... : Ok
Cyl -34; Head 0......................... : Ok
Cyl -35; Head 0......................... : Ok
Cyl -36; Head 0......................... : Ok
Cyl -37; Head 0......................... : Ok
Cyl -38; Head 0......................... : Ok
Cyl -39; Head 0......................... : Ok
Cyl -40; Head 0......................... : Ok
Cyl -41; Head 0......................... : Ok
Cyl -42; Head 0......................... : Ok
Cyl -43; Head 0......................... : Ok
Cyl -44; Head 0......................... : Ok
Cyl -45; Head 0......................... : Ok
Cyl -46; Head 0......................... : Ok
Cyl -47; Head 0......................... : Ok
Cyl -48; Head 0......................... : Ok
Cyl -49; Head 0......................... : Ok
Cyl -50; Head 0......................... : Ok
Cyl -51; Head 0......................... : Ok
Cyl -52; Head 0......................... : Ok
Cyl -53; Head 0......................... : Ok
Cyl -54; Head 0......................... : Ok
Cyl -55; Head 0......................... : Ok
Cyl -56; Head 0......................... : Ok
Cyl -57; Head 0......................... : Ok
Cyl -58; Head 0......................... : Ok
Cyl -59; Head 0......................... : Ok
Cyl -60; Head 0......................... : Ok
Cyl -61; Head 0......................... : Ok
Cyl -62; Head 0......................... : Ok
Cyl -63; Head 0......................... : Ok
Backup process completed

复制代码

Sunny · 发表于 2016-12-23 13:22:16

Techno mode key
Techno mode key......................... : Ok

RAM:
HDD Info reading........................ : Ok
Heads number............................ : 2
Cyl Count............................... : 64

Zone allocation table................... : Ok
SA SPT.................................. : 533

ROM:
Read ROM................................ : Ok
ROM Data size........................... : 128 Kb
ROM Modules:
ROM version............................. : 10.9KE
ROM F/W version......................... : 109KE
Overlay F/W version..................... : 10.9KE
Servo F/W version....................... : 02.8D

Heads configuration..................... : by map
Heads number............................ : 2
Heads number in use..................... : 2
Switched off heads...................... : No
Heads map............................... : 0,1

Service area:
Permanent overlay....................... : Loaded
SA dir reading (ID)..................... : Ok (Copy 0)
Configuration reading................... : Ok
Master Password......................... : has not been set
User Password........................... : has not been set

HDD resources backup
HDD info report......................... : Ok
Read ROM
Into file............................... : <HDD Profile>\Data\SABackup\ROM\ROM_10-9KE_10-9KE_02-8D.bin
ROM Data size........................... : 128 Kb
Ok

Read ROM modules
Into file............................... : <HDD Profile>\Data\SABackup\ROM
Module : 0A............................. : Ok
Module : 0D............................. : Ok
Module : 30............................. : Ok
Module : 47............................. : Ok

Reading modules
Into folder............................. : <HDD Profile>\Data\SABackup\Modules\
Reading method.......................... : Selected copies
Module 01 Copy 0........................ : Ok
Module 01 Copy 1........................ : Ok
Module 26 Copy 0........................ : Ok
Module 26 Copy 1........................ : Ok
Module 1C Copy 0........................ : Ok
Module 1C Copy 1........................ : Ok
Module 43 Copy 0........................ : Ok
Module 43 Copy 1........................ : Ok
Module 04 Copy 0........................ : Ok
Module 04 Copy 1........................ : Ok
Module 0C Copy 0........................ : Ok
Module 0C Copy 1........................ : Ok
Module 53 Copy 0........................ : Ok
Module 53 Copy 1........................ : Ok
Module 35 Copy 0........................ : Ok
Module 35 Copy 1........................ : Ok
Module 02 Copy 0........................ : Ok
Module 02 Copy 1........................ : Ok
Module 33 Copy 0........................ : Ok
Module 33 Copy 1........................ : Ok
Module 1B Copy 0........................ : Ok
Module 1B Copy 1........................ : Ok
Module 19 Copy 0........................ : Ok
Module 19 Copy 1........................ : Ok
Module 42 Copy 0........................ : Ok
Module 42 Copy 1........................ : Ok
Module 07 Copy 0........................ : Ok
Module 07 Copy 1........................ : Ok
Module 4A Copy 0........................ : Ok
Module 4A Copy 1........................ : Ok
Module 37 Copy 0........................ : Ok
Module 37 Copy 1........................ : Ok
Module 2D Copy 0........................ : Ok
Module 2D Copy 1........................ : Ok
Module 24 Copy 0........................ : Ok
Module 24 Copy 1........................ : Ok
Module 1E Copy 0........................ : Ok
Module 1E Copy 1........................ : Ok
Module 40 Copy 0........................ : Ok
Module 40 Copy 1........................ : Ok
Module 05 Copy 0........................ : Ok
Module 05 Copy 1........................ : Ok
Module 49 Copy 0........................ : Ok
Module 49 Copy 1........................ : Ok
Module 62 Copy 0........................ : Ok
Module 62 Copy 1........................ : Ok
Module 11 Copy 0........................ : Ok
Module 11 Copy 1........................ : Ok
Module 21 Copy 0........................ : Ok
Module 21 Copy 1........................ : Ok
Module 61 Copy 0........................ : Ok
Module 61 Copy 1........................ : Ok
Module 39 Copy 0........................ : Ok
Module 39 Copy 1........................ : Ok
Module 32 Copy 0........................ : Ok
Module 32 Copy 1........................ : Ok
Module 36 Copy 0........................ : Ok
Module 36 Copy 1........................ : Ok
Module 25 Copy 0........................ : Ok
Module 25 Copy 1........................ : Ok
Module 22 Copy 0........................ : Ok
Module 22 Copy 1........................ : Ok
Module 15 Copy 0........................ : Ok
Module 15 Copy 1........................ : Ok
Module 28 Copy 0........................ : Ok
Module 28 Copy 1........................ : Ok
Module 2F Copy 0........................ : Ok
Module 2F Copy 1........................ : Ok
Module 50 Copy 0........................ : Ok
Module 50 Copy 1........................ : Ok
Module 38 Copy 0........................ : Ok
Module 38 Copy 1........................ : Ok
Module 23 Copy 0........................ : Ok
Module 23 Copy 1........................ : Ok
Module 41 Copy 0........................ : Ok
Module 41 Copy 1........................ : Ok
Module 34 Copy 0........................ : Ok
Module 34 Copy 1........................ : Ok
Module 29 Copy 0........................ : Ok
Module 29 Copy 1........................ : Ok
Module 51 Copy 0........................ : Ok
Module 51 Copy 1........................ : Ok
Module 31 Copy 0........................ : Ok
Module 31 Copy 1........................ : Ok
Module 17 Copy 0........................ : Ok
Module 17 Copy 1........................ : Ok
Module 4C Copy 0........................ : Ok
Module 4C Copy 1........................ : Ok
Module 06 Copy 0........................ : Ok
Module 06 Copy 1........................ : Ok
Module 2A Copy 0........................ : Ok
Module 2A Copy 1........................ : Ok
Module 52 Copy 0........................ : Ok
Module 52 Copy 1........................ : Ok
Module C4 Copy 0........................ : Ok
Module C4 Copy 1........................ : Ok
Module C5 Copy 0........................ : Ok
Module C5 Copy 1........................ : Ok
Module CC Copy 0........................ : Ok
Module CC Copy 1........................ : Ok
Module CA Copy 0........................ : Ok
Module CA Copy 1........................ : Ok
Module CB Copy 0........................ : Ok
Module CB Copy 1........................ : Ok
Module CD Copy 0........................ : Ok
Module CD Copy 1........................ : Ok
Module CF Copy 0........................ : Ok
Module CF Copy 1........................ : Ok
Module CE Copy 0........................ : Ok
Module CE Copy 1........................ : Ok
Module 91 Copy 0........................ : Ok
Module 91 Copy 1........................ : Ok
Module 92 Copy 0........................ : Ok
Module 92 Copy 1........................ : Ok
Module 93 Copy 0........................ : Ok
Module 93 Copy 1........................ : Ok
Module C1 Copy 0........................ : Ok
Module C1 Copy 1........................ : Ok
Module C2 Copy 0........................ : Ok
Module C2 Copy 1........................ : Ok
Module C7 Copy 0........................ : Ok
Module C7 Copy 1........................ : Ok
Module 9E Copy 0........................ : Ok
Module 9E Copy 1........................ : Ok
Module B1 Copy 0........................ : Ok
Module B1 Copy 1........................ : Ok
Module E0 Copy 0........................ : Ok
Module E0 Copy 1........................ : Ok
Module E8 Copy 0........................ : Ok
Module E8 Copy 1........................ : Ok
Module FE Copy 0........................ : Ok
Module FE Copy 1........................ : Ok
Module D5 Copy 0........................ : Ok
Module D5 Copy 1........................ : Ok
Module DA Copy 0........................ : Ok
Module DA Copy 1........................ : Ok
Module DB Copy 0........................ : Ok
Module DB Copy 1........................ : Ok
Module DF Copy 0........................ : Ok
Module DF Copy 1........................ : Ok
Module DD Copy 0........................ : Ok
Module DD Copy 1........................ : Ok
Module D6 Copy 0........................ : Ok
Module D6 Copy 1........................ : Ok
Module D7 Copy 0........................ : Ok
Module D7 Copy 1........................ : Ok
Module D2 Copy 0........................ : Ok
Module D2 Copy 1........................ : Ok
Module BB Copy 0........................ : Ok
Module BB Copy 1........................ : Ok
Module D9 Copy 0........................ : Ok
Module D9 Copy 1........................ : Ok
Module D4 Copy 0........................ : Ok
Module D4 Copy 1........................ : Ok
Module DC Copy 0........................ : Ok
Module DC Copy 1........................ : Ok
Module D0 Copy 0........................ : Ok
Module D0 Copy 1........................ : Ok
Module D3 Copy 0........................ : Ok
Module D3 Copy 1........................ : Ok
Module BA Copy 0........................ : Ok
Module BA Copy 1........................ : Ok
Module B9 Copy 0........................ : Ok
Module B9 Copy 1........................ : Ok
Module BC Copy 0........................ : Ok
Module BC Copy 1........................ : Ok
Module FD Copy 0........................ : Ok
Module FD Copy 1........................ : Ok
Module FB Copy 0........................ : Ok
Module FB Copy 1........................ : Ok
Module E6 Copy 0........................ : Ok
Module E6 Copy 1........................ : Ok
Module E7 Copy 0........................ : Ok
Module E7 Copy 1........................ : Ok
Module BE Copy 0........................ : Ok
Module BE Copy 1........................ : Ok
Module B8 Copy 0........................ : Ok
Module B8 Copy 1........................ : Ok
Module BF Copy 0........................ : Ok
Module BF Copy 1........................ : Ok
Module FC Copy 0........................ : Ok
Module FC Copy 1........................ : Ok
Module EE Copy 0........................ : Ok
Module EE Copy 1........................ : Ok
Module E1 Copy 0........................ : Ok
Module E1 Copy 1........................ : Ok
Module E2 Copy 0........................ : Ok
Module E2 Copy 1........................ : Ok
Module E3 Copy 0........................ : Ok
Module E3 Copy 1........................ : Ok
Module E4 Copy 0........................ : Ok
Module E4 Copy 1........................ : Ok
Module E5 Copy 0........................ : Ok
Module E5 Copy 1........................ : Ok
Module E9 Copy 0........................ : Ok
Module E9 Copy 1........................ : Ok
Module DE Copy 0........................ : Ok
Module DE Copy 1........................ : Ok
Module FA Copy 0........................ : Ok
Module FA Copy 1........................ : Ok
Reading service tracks
Into folder............................. : <HDD Profile>\Data\SABackup\Tracks
Reading heads........................... : 0
Cyl -1; Head 0.......................... : Ok
Cyl -2; Head 0.......................... : Ok
Cyl -3; Head 0.......................... : Ok
Cyl -4; Head 0.......................... : Ok
Cyl -5; Head 0.......................... : Ok
Cyl -6; Head 0.......................... : Ok
Cyl -7; Head 0.......................... : Ok
Cyl -8; Head 0.......................... : Ok
Cyl -9; Head 0.......................... : Ok
Cyl -10; Head 0......................... : Ok
Cyl -11; Head 0......................... : Ok
Cyl -12; Head 0......................... : Ok
Cyl -13; Head 0......................... : Ok
Cyl -14; Head 0......................... : Ok
Cyl -15; Head 0......................... : Ok
Cyl -16; Head 0......................... : Ok
Cyl -17; Head 0......................... : Ok
Cyl -18; Head 0......................... : Ok
Cyl -19; Head 0......................... : Ok
Cyl -20; Head 0......................... : Ok
Cyl -21; Head 0......................... : Ok
Cyl -22; Head 0......................... : Ok
Cyl -23; Head 0......................... : Ok
Cyl -24; Head 0......................... : Ok
Cyl -25; Head 0......................... : Ok
Cyl -26; Head 0......................... : Ok
Cyl -27; Head 0......................... : Ok
Cyl -28; Head 0......................... : Ok
Cyl -29; Head 0......................... : Ok
Cyl -30; Head 0......................... : Ok
Cyl -31; Head 0......................... : Ok
Cyl -32; Head 0......................... : Ok
Cyl -33; Head 0......................... : Ok
Cyl -34; Head 0......................... : Ok
Cyl -35; Head 0......................... : Ok
Cyl -36; Head 0......................... : Ok
Cyl -37; Head 0......................... : Ok
Cyl -38; Head 0......................... : Ok
Cyl -39; Head 0......................... : Ok
Cyl -40; Head 0......................... : Ok
Cyl -41; Head 0......................... : Ok
Cyl -42; Head 0......................... : Ok
Cyl -43; Head 0......................... : Ok
Cyl -44; Head 0......................... : Ok
Cyl -45; Head 0......................... : Ok
Cyl -46; Head 0......................... : Ok
Cyl -47; Head 0......................... : Ok
Cyl -48; Head 0......................... : Ok
Cyl -49; Head 0......................... : Ok
Cyl -50; Head 0......................... : Ok
Cyl -51; Head 0......................... : Ok
Cyl -52; Head 0......................... : Ok
Cyl -53; Head 0......................... : Ok
Cyl -54; Head 0......................... : Ok
Cyl -55; Head 0......................... : Ok
Cyl -56; Head 0......................... : Ok
Cyl -57; Head 0......................... : Ok
Cyl -58; Head 0......................... : Ok
Cyl -59; Head 0......................... : Ok
Cyl -60; Head 0......................... : Ok
Cyl -61; Head 0......................... : Ok
Cyl -62; Head 0......................... : Ok
Cyl -63; Head 0......................... : Ok

Backup process completed

Sunny · 发表于 2016-12-23 13:23:16

Version................................. : 0x0002
Controller firmware revision............ : 10.9KE
Servo firmware revision................. : 02.8D
Overlay firmware revision............... : 10.9KE
Surface format revision................. : Y4.03E
Read channel firmware revision.......... : 01.22H
Drive type.............................. : Desktop 3.5 Inch
Interface type.......................... : Serial ATA
PCBA type............................... : Entek rev 0
ROM type................................ : Serial Flash
Flash size (page size).................. : 128 (64) kB
DRAM size (allocated)................... : 0 (0) kB
Drive Parts Information
Controller chip vendor.................. : 0x0000
Controller chip revision................ : 0x31B2 88i6545B2
MicroP vendor........................... : 0x0000
MicroP revision......................... : 0x31B2
Channel chip vendor..................... : 0x0046
Channel chip revision................... : 0x0021
Preamp vendor........................... : 0x0001
Preamp revision......................... : 0x0004
Power chip vendor....................... : 0x0000
Power chip revision..................... : 0x0000
Drive Build Information
Product ID (Ext)........................ : 0x1658 (0x0000)
Model................................... :
Serial number........................... :
DCM..................................... : SQBFLMPMMBHMCURWVZKSUF
Original built date..................... : 07-03-2008
Reconfiguration date.................... :
Drive platters.......................... : 1
Physical heads.......................... : 2
Virtual heads........................... : 2
Depop bit map........................... : 0x03
Zones................................... : 21
Servo wedges............................ : 164
Negative cylinders...................... : 64
Spindle RPM............................. : 7210
User cylinders.......................... : 83936
Cylinder wedge skew..................... : 22
Head skew............................... : 40
Cluster skew............................ : 60
Error Correction Information
No. of interleaves in OTF............... : 1
Number of ECC + CRC Bytes............... : 65
No. of bytes(symbols) corrected by OTF.. : 30(0)
No. of bytes(symbols) corrected by FW... : 58(0)
Feature flags........................... : 0x00000000
Jumper Settings
Jumper setting value.................... : 0x0000
Master jumper........................... : OFF
Slave jumper............................ : OFF
CSEL jumper............................. : OFF
ReloList File Information
Number of relocations................... : 0
Number of tares......................... : 0
Number of Ftares........................ : 0
Max remaining possible relos............ : 661
Number of consumed spares............... : 0
Last LBA of spare pool.................. : 157 159 134
Drive Format Information
Tracks per inch (in KTPI)............... : 85
Area Density in 100MB (per platter)..... : 804
Format Type(0).......................... : primary format
SATA IPM Timers
Partial................................. : 500 ms
Slumber................................. : 2500 ms

复制代码

Version................................. : 0x0002
Controller firmware revision............ : 10.9KE
Servo firmware revision................. : 02.8D
Overlay firmware revision............... : 10.9KE
Surface format revision................. : Y4.03E
Read channel firmware revision.......... : 01.22H
Drive type.............................. : Desktop 3.5 Inch
Interface type.......................... : Serial ATA
PCBA type............................... : Entek rev 0
ROM type................................ : Serial Flash
Flash size (page size).................. : 128 (64) kB
DRAM size (allocated)................... : 0 (0) kB

Drive Parts Information
Controller chip vendor.................. : 0x0000
Controller chip revision................ : 0x31B2 88i6545B2
MicroP vendor........................... : 0x0000
MicroP revision......................... : 0x31B2
Channel chip vendor..................... : 0x0046
Channel chip revision................... : 0x0021
Preamp vendor........................... : 0x0001
Preamp revision......................... : 0x0004
Power chip vendor....................... : 0x0000
Power chip revision..................... : 0x0000

Drive Build Information
Product ID (Ext)........................ : 0x1658 (0x0000)
Model................................... :
Serial number........................... :
DCM..................................... : SQBFLMPMMBHMCURWVZKSUF
Original built date..................... : 07-03-2008
Reconfiguration date.................... :
Drive platters.......................... : 1
Physical heads.......................... : 2
Virtual heads........................... : 2
Depop bit map........................... : 0x03
Zones................................... : 21
Servo wedges............................ : 164
Negative cylinders...................... : 64
Spindle RPM............................. : 7210
User cylinders.......................... : 83936
Cylinder wedge skew..................... : 22
Head skew............................... : 40
Cluster skew............................ : 60

Error Correction Information
No. of interleaves in OTF............... : 1
Number of ECC + CRC Bytes............... : 65
No. of bytes(symbols) corrected by OTF.. : 30(0)
No. of bytes(symbols) corrected by FW... : 58(0)
Feature flags........................... : 0x00000000

Jumper Settings
Jumper setting value.................... : 0x0000
Master jumper........................... : OFF
Slave jumper............................ : OFF
CSEL jumper............................. : OFF

ReloList File Information
Number of relocations................... : 0
Number of tares......................... : 0
Number of Ftares........................ : 0
Max remaining possible relos............ : 661
Number of consumed spares............... : 0
Last LBA of spare pool.................. : 157 159 134

Drive Format Information
Tracks per inch (in KTPI)............... : 85
Area Density in 100MB (per platter)..... : 804
Format Type(0).......................... : primary format

SATA IPM Timers
Partial................................. : 500 ms
Slumber................................. : 2500 ms

Sunny · 发表于 2016-12-23 13:23:47

Common
**************************************************************************************************************************************************************
Format Version......................................................................... : 1
VSC Implementation, Minor.............................................................. : 1
VSC Implementation, Major.............................................................. : 4
Max Action Code Supported.............................................................. : 54
Last operation
**************************************************************************************************************************************************************
Last Cmd Type.......................................................................... : 3 VSC Data CMD
Last Cmd Register...................................................................... : 176 0xB0
Last VSC Cmd Action Code............................................................... : 13 0x000D
Last Feature Register.................................................................. : 213 0x00D5
Last Sector Count Register............................................................. : 1 0x0001
Last Sector Number Register............................................................ : 191 0x00BF
Last Cylinder Register................................................................. : 0xC24F 49 743
Last LBA High.......................................................................... : 0x0000
Last Device Control Register........................................................... : 0x00
Last Device/head Register.............................................................. : 0xA0
Last Task File Response Reg/Error...................................................... : 0x00/0x00
Errors
**************************************************************************************************************************************************************
Extended Error......................................................................... : 0x0000 SUCCESS
Secondary Error Code................................................................... : 0x0000
Info
**************************************************************************************************************************************************************
Host Connection Speed.................................................................. : 0 NOT SUPPORTED
APM Level.............................................................................. : 0x00
Sectors Xfer Pending to/from drive..................................................... : 0
Last Task File Data.................................................................... : 0
Status
**************************************************************************************************************************************************************
Status Flags 1......................................................................... : 0x1083
Bit 0: VSC Command Set................................................................. : Enabled
Bit 1: Smart is........................................................................ : Enabled
Bit 2: Legacy Native Mode.............................................................. : Not supported
Bit 3: Instability bit is.............................................................. : cleared
Bit 4: Pending VSC Tx from Drive to Host............................................... : [NO]
Bit 5: VSC Command currently executing in background................................... : [NO]
Bit 9: At least one DBS event occurred since the last clear DRM........................ : [NO]
Bit 10: At least one reset-while-busy event occurred since the last clear DRM.......... : [NO]
Bit 11: Drive is powered up in Standby and has not spun................................ : [NO]
Bit 13: Drive in Queue Abort Mode...................................................... : [NO]
Bit 16: VSC POR Reset Occurred......................................................... : [NO]
Bit 17: Power On Reset Occurred........................................................ : [NO]
Bit 18: Hardware Reset Occurred........................................................ : [NO]
Bit 19: Software Reset Occurred........................................................ : [NO]
Bit 20: Debug Stop Occurred............................................................ : [NO]
Bit 25: Write Fault Occurred........................................................... : [NO]
Bit 26 & 27: Drive Protect State....................................................... : 0 UnLock
Bit 28: Encryption Key Loaded.......................................................... : [NO]
Bit 30-31: Offline Pending Status...................................................... : 0 NO OL PENDING
Current Drive State 1.................................................................. : 0x0 Idle
Current Drive State 2.................................................................. : 0x0
BG DST/Smart OL State.................................................................. : Suspend
Test Type.............................................................................. : 0x0 No DST or Smart OL
Progress Indicator..................................................................... : 0x0
Write Fault LBA........................................................................ : 0
Position
**************************************************************************************************************************************************************
Current LBA............................................................................ : 0
Current Track Offset................................................................... : 1121
Virtual cylinder of current active track............................................... : 651
Virtual head of current active track................................................... : 0
Servo Track Offset of current active track............................................. : 0 (for VDT drives only)
Virt Servo Cylinder of current active track............................................ : 0 (for VDT drives only)
Data-to-Servo Conversion Offset........................................................ : 0 (for VDT drives only)
Current Data Zone...................................................................... : 1
Current Wedge Start.................................................................... : 13
Current Wedge Size..................................................................... : 3693
Temperature
**************************************************************************************************************************************************************
Drive Temperature (avg)................................................................ : 18
Junction Temperature (degree).......................................................... : 32
Flex Temperature (degree).............................................................. : 128
Coil Temperature....................................................................... : 0
Servo
**************************************************************************************************************************************************************
Servo Status........................................................................... : 0x006C
Seed Cyl............................................................................... : 0
Seed Head.............................................................................. : 0
Seed Sector............................................................................ : 0
Sector Skew............................................................................ : 14
Wedge Skew............................................................................. : 2
Debug
**************************************************************************************************************************************************************
Debugstop Code......................................................................... : 0x0000
PST Information
**************************************************************************************************************************************************************
PTM File Id............................................................................ : 0x00
PTM Test Id............................................................................ : 0x00
Current VSC Command.................................................................... : 0x0D
PTM
**************************************************************************************************************************************************************
PTM Status............................................................................. : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

复制代码

Common
**************************************************************************************************************************************************************
Format Version......................................................................... : 1
VSC Implementation, Minor.............................................................. : 1
VSC Implementation, Major.............................................................. : 4
Max Action Code Supported.............................................................. : 54

Last operation
**************************************************************************************************************************************************************
Last Cmd Type.......................................................................... : 3 VSC Data CMD
Last Cmd Register...................................................................... : 176 0xB0
Last VSC Cmd Action Code............................................................... : 13 0x000D
Last Feature Register.................................................................. : 213 0x00D5
Last Sector Count Register............................................................. : 1 0x0001
Last Sector Number Register............................................................ : 191 0x00BF
Last Cylinder Register................................................................. : 0xC24F 49 743
Last LBA High.......................................................................... : 0x0000
Last Device Control Register........................................................... : 0x00
Last Device/head Register.............................................................. : 0xA0
Last Task File Response Reg/Error...................................................... : 0x00/0x00

Errors
**************************************************************************************************************************************************************
Extended Error......................................................................... : 0x0000 SUCCESS
Secondary Error Code................................................................... : 0x0000

Info
**************************************************************************************************************************************************************
Host Connection Speed.................................................................. : 0 NOT SUPPORTED
APM Level.............................................................................. : 0x00
Sectors Xfer Pending to/from drive..................................................... : 0
Last Task File Data.................................................................... : 0

Status
**************************************************************************************************************************************************************
Status Flags 1......................................................................... : 0x1083
Bit 0: VSC Command Set................................................................. : Enabled
Bit 1: Smart is........................................................................ : Enabled
Bit 2: Legacy Native Mode.............................................................. : Not supported
Bit 3: Instability bit is.............................................................. : cleared
Bit 4: Pending VSC Tx from Drive to Host............................................... : [NO]
Bit 5: VSC Command currently executing in background................................... : [NO]
Bit 9: At least one DBS event occurred since the last clear DRM........................ : [NO]
Bit 10: At least one reset-while-busy event occurred since the last clear DRM.......... : [NO]
Bit 11: Drive is powered up in Standby and has not spun................................ : [NO]
Bit 13: Drive in Queue Abort Mode...................................................... : [NO]
Bit 16: VSC POR Reset Occurred......................................................... : [NO]
Bit 17: Power On Reset Occurred........................................................ : [NO]
Bit 18: Hardware Reset Occurred........................................................ : [NO]
Bit 19: Software Reset Occurred........................................................ : [NO]
Bit 20: Debug Stop Occurred............................................................ : [NO]
Bit 25: Write Fault Occurred........................................................... : [NO]
Bit 26 & 27: Drive Protect State....................................................... : 0 UnLock
Bit 28: Encryption Key Loaded.......................................................... : [NO]
Bit 30-31: Offline Pending Status...................................................... : 0 NO OL PENDING
Current Drive State 1.................................................................. : 0x0 Idle
Current Drive State 2.................................................................. : 0x0
BG DST/Smart OL State.................................................................. : Suspend
Test Type.............................................................................. : 0x0 No DST or Smart OL
Progress Indicator..................................................................... : 0x0
Write Fault LBA........................................................................ : 0

Position
**************************************************************************************************************************************************************
Current LBA............................................................................ : 0
Current Track Offset................................................................... : 1121
Virtual cylinder of current active track............................................... : 651
Virtual head of current active track................................................... : 0
Servo Track Offset of current active track............................................. : 0 (for VDT drives only)
Virt Servo Cylinder of current active track............................................ : 0 (for VDT drives only)
Data-to-Servo Conversion Offset........................................................ : 0 (for VDT drives only)
Current Data Zone...................................................................... : 1
Current Wedge Start.................................................................... : 13
Current Wedge Size..................................................................... : 3693

Temperature
**************************************************************************************************************************************************************
Drive Temperature (avg)................................................................ : 18
Junction Temperature (degree).......................................................... : 32
Flex Temperature (degree).............................................................. : 128
Coil Temperature....................................................................... : 0

Servo
**************************************************************************************************************************************************************
Servo Status........................................................................... : 0x006C
Seed Cyl............................................................................... : 0
Seed Head.............................................................................. : 0
Seed Sector............................................................................ : 0
Sector Skew............................................................................ : 14
Wedge Skew............................................................................. : 2

Debug
**************************************************************************************************************************************************************
Debugstop Code......................................................................... : 0x0000

PST Information
**************************************************************************************************************************************************************
PTM File Id............................................................................ : 0x00
PTM Test Id............................................................................ : 0x00
Current VSC Command.................................................................... : 0x0D

PTM
**************************************************************************************************************************************************************
PTM Status............................................................................. : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

		自动登录	找回密码
密码			立即注册

WDC WD800JD-55MSA1-10-01E01-WD-WMAM9CLC8458-701335-006-109KE-533-0-1

本帖子中包含更多资源