WDC WD5000LMVW-11CKRS0-01-01A01-WD-WX41A2324921 771859-000 0002005R 1437 0-1

Sunny

WDC WD5000LMVW-11CKRS0-01-01A01-WD-WX41A2324921 771859-000 0002005R 1437 0-1
PCB 2060-771859-000 REV P1

游客，如果您要查看本帖隐藏内容请回复

1. >Techno mode key
   
2. >Techno mode key......................... : Ok
   
3. >
   
4. >RAM:
   
5. >HDD Info reading........................ : Ok
   
6. >Heads number............................ : 2
   
7. >Cyl Count............................... : 256
   
8. >
   
9. >Zone allocation table................... : Ok
   
10. >SA SPT.................................. : 1437
    
11. >
    
12. >ROM:
    
13. >Read ROM................................ : Ok
    
14. >ROM Data size........................... : 256 Kb
    
15. >Flash ROM dir reading................... : Ok (Active)
    
16. >Flash ROM dir reading (Ext)............. : Ok
    
17. >Modules directory address............... : 64 671
    
18. >SA regions address...................... : by default
    
19. >Module 02 access........................ : Granted
    
20. >SA Translator loading................... : Ok
    
21. >
    
22. >ROM Modules:
    
23. >ROM version............................. : 02.5RN
    
24. >ROM F/W version......................... : 0002005R
    
25. >Overlay F/W version..................... : 02.5SN
    
26. >Servo F/W version....................... : 02.14
    
27. >
    
28. >Heads configuration..................... : by map
    
29. >Heads number............................ : 2
    
30. >Heads number in use..................... : 2
    
31. >Switched off heads...................... : No
    
32. >Heads map............................... : 0,1
    
33. >
    
34. >Service area:
    
35. >Permanent overlay....................... : Loaded
    
36. >SA dir reading (ID)..................... : Ok
    
37. >SA Access............................... : Copy 0,Copy 1
    
38. >
    

复制代码

>Techno mode key
>Techno mode key......................... : Ok
>
>RAM:
>HDD Info reading........................ : Ok
>Heads number............................ : 2
>Cyl Count............................... : 256
>
>Zone allocation table................... : Ok
>SA SPT.................................. : 1437
>
>ROM:
>Read ROM................................ : Ok
>ROM Data size........................... : 256 Kb
>Flash ROM dir reading................... : Ok (Active)
>Flash ROM dir reading (Ext)............. : Ok
>Modules directory address............... : 64 671
>SA regions address...................... : by default
>Module 02 access........................ : Granted
>SA Translator loading................... : Ok
>
>ROM Modules:
>ROM version............................. : 02.5RN
>ROM F/W version......................... : 0002005R
>Overlay F/W version..................... : 02.5SN
>Servo F/W version....................... : 02.14
>
>Heads configuration..................... : by map
>Heads number............................ : 2
>Heads number in use..................... : 2
>Switched off heads...................... : No
>Heads map............................... : 0,1
>
>Service area:
>Permanent overlay....................... : Loaded
>SA dir reading (ID)..................... : Ok
>SA Access............................... : Copy 0,Copy 1
>

Sunny

1. Version................................. : 0x0002
   
2. Controller firmware revision............ : 02.5RN
   
3. Servo firmware revision................. : 02.14
   
4. Overlay firmware revision............... : 02.5SN
   
5. Surface format revision................. : S1.003
   
6. Read channel firmware revision.......... : G.00028A
   
7. Drive type.............................. : Mobile 2.5 Inch
   
8. Interface type.......................... : Serial ATA
   
9. PCBA type............................... : Entek rev 0
   
10. ROM type................................ : Serial Flash
    
11. Flash size (page size).................. : 256 (4) kB
    
12. DRAM size (allocated)................... : 16384 (9692) kB
    
13. 
    
14. Drive Parts Information
    
15. Controller chip vendor.................. : 0x0000
    
16. Controller chip revision................ : 0x95B0 88i9346B0
    
17. MicroP vendor........................... : 0x0000
    
18. MicroP revision......................... : 0x95B0
    
19. Channel chip vendor..................... : 0x0000
    
20. Channel chip revision................... : 0x0000
    
21. Preamp vendor........................... : 0x0001
    
22. Preamp revision......................... : 0x0001
    
23. Power chip vendor....................... : 0x0000
    
24. Power chip revision..................... : 0x9021
    
25. 
    
26. Drive Build Information
    
27. Product ID (Ext)........................ : 0x16FE (0x0177)
    
28. Model................................... : WDC WD5000LMVW-11CKRS0                  
    
29. Serial number........................... : WD-WX41A2324921
    
30. DCM..................................... : S|BNL|P1MSHRCKRFV1KKUL
    
31. Original built date..................... : 05-17-2013
    
32. Reconfiguration date.................... : 05-16-2013
    
33. Drive platters.......................... : 1
    
34. Physical heads.......................... : 2
    
35. Virtual heads........................... : 2
    
36. Depop bit map........................... : 0x03
    
37. Zones................................... : 61
    
38. Servo wedges............................ : 296
    
39. Negative cylinders...................... : 256
    
40. Spindle RPM............................. : 5419
    
41. User cylinders.......................... : 0
    
42. Cylinder wedge skew..................... : 31
    
43. Head skew............................... : 78
    
44. Cluster skew............................ : 112
    
45. 
    
46. Error Correction Information
    
47. No. of interleaves in OTF............... : 0
    
48. Number of ECC + CRC Bytes............... : 0
    
49. No. of bytes(symbols) corrected by OTF.. : 0(0)
    
50. No. of bytes(symbols) corrected by FW... : 0(0)
    
51. Feature flags........................... : 0x0DC3FBB6
    
52. 
    
53. Jumper Settings
    
54. Jumper setting value.................... : 0x0000
    
55. Master jumper........................... : OFF
    
56. Slave jumper............................ : OFF
    
57. CSEL jumper............................. : OFF
    
58. 
    
59. ReloList File Information
    
60. Number of relocations................... : 427
    
61. Number of tares......................... : 912
    
62. Number of Ftares........................ : 0
    
63. Max remaining possible relos............ : 2614
    
64. Number of consumed spares............... : 0
    
65. Last LBA of spare pool.................. : 980 611 999
    
66. 
    
67. Drive Format Information
    
68. Tracks per inch (in KTPI)............... : 0
    
69. Area Density in 100MB (per platter)..... : 5020
    
70. Format Type(0).......................... : primary format
    
71. 
    
72. SATA IPM Timers
    
73. Partial................................. : 5 ms
    
74. Slumber................................. : 100 ms
    

复制代码

Version................................. : 0x0002
Controller firmware revision............ : 02.5RN
Servo firmware revision................. : 02.14
Overlay firmware revision............... : 02.5SN
Surface format revision................. : S1.003
Read channel firmware revision.......... : G.00028A
Drive type.............................. : Mobile 2.5 Inch
Interface type.......................... : Serial ATA
PCBA type............................... : Entek rev 0
ROM type................................ : Serial Flash
Flash size (page size).................. : 256 (4) kB
DRAM size (allocated)................... : 16384 (9692) kB

Drive Parts Information
Controller chip vendor.................. : 0x0000
Controller chip revision................ : 0x95B0 88i9346B0
MicroP vendor........................... : 0x0000
MicroP revision......................... : 0x95B0
Channel chip vendor..................... : 0x0000
Channel chip revision................... : 0x0000
Preamp vendor........................... : 0x0001
Preamp revision......................... : 0x0001
Power chip vendor....................... : 0x0000
Power chip revision..................... : 0x9021

Drive Build Information
Product ID (Ext)........................ : 0x16FE (0x0177)
Model................................... : WDC WD5000LMVW-11CKRS0                  
Serial number........................... : WD-WX41A2324921
DCM..................................... : S|BNL|P1MSHRCKRFV1KKUL
Original built date..................... : 05-17-2013
Reconfiguration date.................... : 05-16-2013
Drive platters.......................... : 1
Physical heads.......................... : 2
Virtual heads........................... : 2
Depop bit map........................... : 0x03
Zones................................... : 61
Servo wedges............................ : 296
Negative cylinders...................... : 256
Spindle RPM............................. : 5419
User cylinders.......................... : 0
Cylinder wedge skew..................... : 31
Head skew............................... : 78
Cluster skew............................ : 112

Error Correction Information
No. of interleaves in OTF............... : 0
Number of ECC + CRC Bytes............... : 0
No. of bytes(symbols) corrected by OTF.. : 0(0)
No. of bytes(symbols) corrected by FW... : 0(0)
Feature flags........................... : 0x0DC3FBB6

Jumper Settings
Jumper setting value.................... : 0x0000
Master jumper........................... : OFF
Slave jumper............................ : OFF
CSEL jumper............................. : OFF

ReloList File Information
Number of relocations................... : 427
Number of tares......................... : 912
Number of Ftares........................ : 0
Max remaining possible relos............ : 2614
Number of consumed spares............... : 0
Last LBA of spare pool.................. : 980 611 999

Drive Format Information
Tracks per inch (in KTPI)............... : 0
Area Density in 100MB (per platter)..... : 5020
Format Type(0).......................... : primary format

SATA IPM Timers
Partial................................. : 5 ms
Slumber................................. : 100 ms

ccut

好东西................................

jls123456789@

好东西................................