|
WD10SPCX-08HWST0-01-01A01-WD-WX71A9329952-0007002J-1564-0.1.2.3
- >Techno mode key
- >Techno mode key......................... : Ok
- >
- >RAM:
- >HDD Info reading........................ : Ok
- >Heads number............................ : 4
- >Cyl Count............................... : 256
- >
- >Zone allocation table................... : Ok
- >SA SPT.................................. : 1564
- >
- >ROM:
- >ROM reading............................. : Ok
- >ROM Data size........................... : 512 Kb
- >Flash ROM dir reading................... : Ok (Active)
- >Flash ROM dir reading (Ext)............. : Ok
- >Modules directory address............... : 121 955
- >SA regions address...................... : by default
- >SA Translator loading................... : Ok
- >
- >ROM Modules:
- >ROM version............................. : 07.2JC
- >ROM F/W version......................... : 0007002J
- >Overlay F/W version..................... : 07.2KC
- >Servo F/W version....................... : N0.DP
- >
- >Heads configuration..................... : by map
- >Heads number............................ : 4
- >Heads number in use..................... : 4
- >Switched off heads...................... : No
- >Heads map............................... : 0,1,2,3
- >
- >Service area:
- >Permanent overlay....................... : Loaded
- >SA dir reading (ID)..................... : Ok
- >SA Access............................... : Copy 0,Copy 1,Copy 2,Copy 3
- >
复制代码
>Techno mode key
>Techno mode key......................... : Ok
>
>RAM:
>HDD Info reading........................ : Ok
>Heads number............................ : 4
>Cyl Count............................... : 256
>
>Zone allocation table................... : Ok
>SA SPT.................................. : 1564
>
>ROM:
>ROM reading............................. : Ok
>ROM Data size........................... : 512 Kb
>Flash ROM dir reading................... : Ok (Active)
>Flash ROM dir reading (Ext)............. : Ok
>Modules directory address............... : 121 955
>SA regions address...................... : by default
>SA Translator loading................... : Ok
>
>ROM Modules:
>ROM version............................. : 07.2JC
>ROM F/W version......................... : 0007002J
>Overlay F/W version..................... : 07.2KC
>Servo F/W version....................... : N0.DP
>
>Heads configuration..................... : by map
>Heads number............................ : 4
>Heads number in use..................... : 4
>Switched off heads...................... : No
>Heads map............................... : 0,1,2,3
>
>Service area:
>Permanent overlay....................... : Loaded
>SA dir reading (ID)..................... : Ok
>SA Access............................... : Copy 0,Copy 1,Copy 2,Copy 3
>
|
本帖子中包含更多资源
您需要 登录 才可以下载或查看,没有帐号?立即注册
x
|