|
WD40EFRX-68WT0N0-80-00A80-WCC4E1850306-00000054-2116-0.1.2.3.4.5.6.7
- >Techno mode key
- >Techno mode key......................... : Ok
- >
- >RAM:
- >HDD Info reading........................ : Ok
- >Heads number............................ : 8
- >Cyl Count............................... : 256
- >
- >Zone allocation table................... : Ok
- >SA SPT.................................. : 2116
- >
- >ROM:
- >ROM reading............................. : Ok
- >ROM Data size........................... : 512 Kb
- >Flash ROM dir reading................... : Ok
- >Flash ROM dir reading (Ext)............. : Ok (Active)
- >Modules directory address............... : 402 822
- >SA regions address...................... : by default
- >SA Translator loading................... : Ok
- >
- >ROM Modules:
- >ROM version............................. : 00.54C
- >ROM F/W version......................... : 00000054
- >Overlay F/W version..................... : 00.55C
- >Servo F/W version....................... : 02.49
- >
- >Heads configuration..................... : by map
- >Heads number............................ : 8
- >Heads number in use..................... : 8
- >Switched off heads...................... : No
- >Heads map............................... : 0,1,2,3,4,5,6,7
- >
- >Service area:
- >Permanent overlay....................... : Loaded
- >SA dir reading (ID)..................... : Ok
- >SA Access............................... : Copy 0,Copy 1
- >
复制代码
>Techno mode key
>Techno mode key......................... : Ok
>
>RAM:
>HDD Info reading........................ : Ok
>Heads number............................ : 8
>Cyl Count............................... : 256
>
>Zone allocation table................... : Ok
>SA SPT.................................. : 2116
>
>ROM:
>ROM reading............................. : Ok
>ROM Data size........................... : 512 Kb
>Flash ROM dir reading................... : Ok
>Flash ROM dir reading (Ext)............. : Ok (Active)
>Modules directory address............... : 402 822
>SA regions address...................... : by default
>SA Translator loading................... : Ok
>
>ROM Modules:
>ROM version............................. : 00.54C
>ROM F/W version......................... : 00000054
>Overlay F/W version..................... : 00.55C
>Servo F/W version....................... : 02.49
>
>Heads configuration..................... : by map
>Heads number............................ : 8
>Heads number in use..................... : 8
>Switched off heads...................... : No
>Heads map............................... : 0,1,2,3,4,5,6,7
>
>Service area:
>Permanent overlay....................... : Loaded
>SA dir reading (ID)..................... : Ok
>SA Access............................... : Copy 0,Copy 1
>
|
本帖子中包含更多资源
您需要 登录 才可以下载或查看,没有帐号?立即注册
x
|