|
楼主 |
发表于 2017-3-25 16:35:33
|
显示全部楼层
- >Techno mode key
- >Techno mode key......................... : Ok
- >
- >RAM:
- >HDD Info reading........................ : Ok
- >Heads number............................ : 6
- >Cyl Count............................... : 256
- >
- >Zone allocation table................... : Ok
- >SA SPT.................................. : 1364
- >
- >ROM:
- >Read ROM................................ : Ok
- >ROM Data size........................... : 512 Kb
- >Flash ROM dir reading................... : Ok
- >SA regions address...................... : by default
- >Module 02 access........................ : Granted
- >SA Translator loading................... : Ok
- >
- >ROM Modules:
- >ROM version............................. : 03.8CB
- >ROM F/W version......................... : 0003008C
- >Overlay F/W version..................... : 03.8CB
- >Servo F/W version....................... : 02.83
- >
- >Heads configuration..................... : by map
- >Heads number............................ : 6
- >Heads number in use..................... : 6
- >Switched off heads...................... : No
- >Heads map............................... : 0,1,2,3,4,5
- >
- >Service area:
- >Permanent overlay....................... : Loaded
- >SA dir reading (ID)..................... : Ok
- >SA Access............................... : Copy 0,Copy 1,Copy 3
- >
复制代码
>Techno mode key
>Techno mode key......................... : Ok
>
>RAM:
>HDD Info reading........................ : Ok
>Heads number............................ : 6
>Cyl Count............................... : 256
>
>Zone allocation table................... : Ok
>SA SPT.................................. : 1364
>
>ROM:
>Read ROM................................ : Ok
>ROM Data size........................... : 512 Kb
>Flash ROM dir reading................... : Ok
>SA regions address...................... : by default
>Module 02 access........................ : Granted
>SA Translator loading................... : Ok
>
>ROM Modules:
>ROM version............................. : 03.8CB
>ROM F/W version......................... : 0003008C
>Overlay F/W version..................... : 03.8CB
>Servo F/W version....................... : 02.83
>
>Heads configuration..................... : by map
>Heads number............................ : 6
>Heads number in use..................... : 6
>Switched off heads...................... : No
>Heads map............................... : 0,1,2,3,4,5
>
>Service area:
>Permanent overlay....................... : Loaded
>SA dir reading (ID)..................... : Ok
>SA Access............................... : Copy 0,Copy 1,Copy 3
>
|
|