|
WD5000BPVT-22HXZT3-01-01A01-WD-WX51E32R8260-00650018-0.1.2
- >Techno mode key
- >Techno mode key......................... : Ok
- >
- >RAM:
- >HDD Info reading........................ : Ok
- >Heads number............................ : 3
- >Cyl Count............................... : 256
- >
- >Zone allocation table................... : Ok
- >SA SPT.................................. : 1098
- >
- >ROM:
- >ROM reading............................. : Ok
- >ROM Data size........................... : 256 Kb
- >ROM version............................. : 65.18B
- >ROM generation.......................... : 65.18B
- >Link table version...................... : 05.0K.
- >Consolidated ROM version................ : 00650018
- >
- >ROM Modules:
- >Flash ROM dir reading................... : Ok
- >SA regions address...................... : by default
- >SA Translator loading................... : Ok
- >
- >Heads configuration..................... : by map
- >Heads number............................ : 3
- >Heads number in use..................... : 3
- >Switched off heads...................... : No
- >Heads map............................... : 0,1,2
- >ROM Firmware version.................... : 00650018
- >
- >Service area:
- >Permanent overlay....................... : Loaded
- >SA dir reading (ID)..................... : Ok
- >SA Access............................... : Copy 0,Copy 1
- >
复制代码 >Techno mode key
>Techno mode key......................... : Ok
>
>RAM:
>HDD Info reading........................ : Ok
>Heads number............................ : 3
>Cyl Count............................... : 256
>
>Zone allocation table................... : Ok
>SA SPT.................................. : 1098
>
>ROM:
>ROM reading............................. : Ok
>ROM Data size........................... : 256 Kb
>ROM version............................. : 65.18B
>ROM generation.......................... : 65.18B
>Link table version...................... : 05.0K.
>Consolidated ROM version................ : 00650018
>
>ROM Modules:
>Flash ROM dir reading................... : Ok
>SA regions address...................... : by default
>SA Translator loading................... : Ok
>
>Heads configuration..................... : by map
>Heads number............................ : 3
>Heads number in use..................... : 3
>Switched off heads...................... : No
>Heads map............................... : 0,1,2
>ROM Firmware version.................... : 00650018
>
>Service area:
>Permanent overlay....................... : Loaded
>SA dir reading (ID)..................... : Ok
>SA Access............................... : Copy 0,Copy 1
>
|
本帖子中包含更多资源
您需要 登录 才可以下载或查看,没有帐号?立即注册
x
|