|
WD5000AAKX-221CA1-17-01H17-WD-WCAYUZ365642-00030022-1290-0.1
- >Techno mode key
- >Techno mode key......................... : Ok
- >
- >RAM:
- >HDD Info reading........................ : Ok
- >Heads number............................ : 2
- >Cyl Count............................... : 256
- >
- >Zone allocation table................... : Ok
- >SA SPT.................................. : 1290
- >
- >ROM:
- >ROM reading............................. : Ok
- >ROM Data size........................... : 192 Kb
- >Flash ROM dir reading................... : Ok (Active)
- >Flash ROM dir reading (Ext)............. : Ok
- >Modules directory address............... : 72 874
- >SA regions address...................... : by default
- >SA Translator loading................... : Ok
- >
- >ROM Modules:
- >ROM version............................. : 03.22B
- >ROM F/W version......................... : 00030022
- >Overlay F/W version..................... : 03.23B
- >Servo F/W version....................... : 03.0E
- >
- >Heads configuration..................... : by map
- >Heads number............................ : 2
- >Heads number in use..................... : 2
- >Switched off heads...................... : No
- >Heads map............................... : 0,1
- >
- >Service area:
- >Permanent overlay....................... : Loaded
- >SA dir reading (ID)..................... : Ok
- >SA Access............................... : Copy 0,Copy 1
- >
复制代码
>Techno mode key
>Techno mode key......................... : Ok
>
>RAM:
>HDD Info reading........................ : Ok
>Heads number............................ : 2
>Cyl Count............................... : 256
>
>Zone allocation table................... : Ok
>SA SPT.................................. : 1290
>
>ROM:
>ROM reading............................. : Ok
>ROM Data size........................... : 192 Kb
>Flash ROM dir reading................... : Ok (Active)
>Flash ROM dir reading (Ext)............. : Ok
>Modules directory address............... : 72 874
>SA regions address...................... : by default
>SA Translator loading................... : Ok
>
>ROM Modules:
>ROM version............................. : 03.22B
>ROM F/W version......................... : 00030022
>Overlay F/W version..................... : 03.23B
>Servo F/W version....................... : 03.0E
>
>Heads configuration..................... : by map
>Heads number............................ : 2
>Heads number in use..................... : 2
>Switched off heads...................... : No
>Heads map............................... : 0,1
>
>Service area:
>Permanent overlay....................... : Loaded
>SA dir reading (ID)..................... : Ok
>SA Access............................... : Copy 0,Copy 1
>
|
本帖子中包含更多资源
您需要 登录 才可以下载或查看,没有帐号?立即注册
x
|