WD5000LUCT-63RC2Y0-01-01A01-WD-WX51A5660PXY-0003003R硬盘数据恢复固件

Sunny

WD5000LUCT-63RC2Y0-01-01A01-WD-WX51A5660PXY-0003003R硬盘数据恢复固件

游客，如果您要查看本帖隐藏内容请回复

1. >Techno mode key
   
2. >Techno mode key......................... : Ok
   
3. >
   
4. >RAM:
   
5. >HDD Info reading........................ : Ok
   
6. >Heads number............................ : 2
   
7. >Cyl Count............................... : 256
   
8. >
   
9. >Zone allocation table................... : Ok
   
10. >SA SPT.................................. : 1480
    
11. >
    
12. >ROM:
    
13. >Read ROM................................ : Ok
    
14. >ROM Data size........................... : 256 Kb
    
15. >Flash ROM dir reading................... : Ok
    
16. >Flash ROM dir reading (Ext)............. : Ok (Active)
    
17. >Modules directory address............... : 70 545
    
18. >SA regions address...................... : by default
    
19. >SA regions address (RAM)................ : by default
    
20. >Module 02 access........................ : Granted
    
21. >SA Translator loading................... : Ok
    
22. >
    
23. >ROM Modules:
    
24. >ROM version............................. : 03.3RK
    
25. >ROM F/W version......................... : 0003003R
    
26. >Overlay F/W version..................... : 03.3SK
    
27. >Servo F/W version....................... : D1.0A
    
28. >
    
29. >Heads configuration..................... : by map
    
30. >Heads number............................ : 2
    
31. >Heads number in use..................... : 2
    
32. >Switched off heads...................... : No
    
33. >Heads map............................... : 0,1
    
34. >
    
35. >Service area:
    
36. >SA dir reading (ID)..................... : Ok
    
37. >SA Access............................... : Copy 0,Copy 1
    
38. >
    

复制代码

Sunny

1. Version................................. : 0x0002
   
2. Controller firmware revision............ : 03.3RK
   
3. Servo firmware revision................. : D1.0A
   
4. Overlay firmware revision............... : 03.3SK
   
5. Surface format revision................. : U1.A09
   
6. Read channel firmware revision.......... : A1.74000
   
7. Drive type.............................. : Mobile 2.5 Inch
   
8. Interface type.......................... : Serial ATA
   
9. PCBA type............................... : Entek rev 0
   
10. ROM type................................ : Serial Flash
    
11. Flash size (page size).................. : 256 (4) kB
    
12. DRAM size (allocated)................... : 16384 (11087) kB
    
13. 
    
14. Drive Parts Information
    
15. Controller chip vendor.................. : 0x0000
    
16. Controller chip revision................ : 0x47A0 88i4748A0
    
17. MicroP vendor........................... : 0x0000
    
18. MicroP revision......................... : 0x47A0
    
19. Channel chip vendor..................... : 0x0047
    
20. Channel chip revision................... : 0x0000
    
21. Preamp vendor........................... : 0x0000
    
22. Preamp revision......................... : 0x0002
    
23. Power chip vendor....................... : 0x0000
    
24. Power chip revision..................... : 0x8320
    
25. 
    
26. Drive Build Information
    
27. Product ID (Ext)........................ : 0x16FE (0x023C)
    
28. Model................................... : WDC WD5000LUCT-63RC2Y0                  
    
29. Serial number........................... : WD-WX51A5660PXY
    
30. DCM..................................... : S|BTL|PDMJHSCDRDVDKBUK
    
31. Original built date..................... : 06-24-2016
    
32. Reconfiguration date.................... :
    
33. Drive platters.......................... : 1
    
34. Physical heads.......................... : 2
    
35. Virtual heads........................... : 2
    
36. Depop bit map........................... : 0x03
    
37. Zones................................... : 61
    
38. Servo wedges............................ : 296
    
39. Negative cylinders...................... : 256
    
40. Spindle RPM............................. : 5419
    
41. User cylinders.......................... : 0
    
42. Cylinder wedge skew..................... : 31
    
43. Head skew............................... : 78
    
44. Cluster skew............................ : 112
    
45. 
    
46. Error Correction Information
    
47. No. of interleaves in OTF............... : 0
    
48. Number of ECC + CRC Bytes............... : 0
    
49. No. of bytes(symbols) corrected by OTF.. : 0(0)
    
50. No. of bytes(symbols) corrected by FW... : 0(0)
    
51. Feature flags........................... : 0x4DC3FDB6
    
52. 
    
53. Jumper Settings
    
54. Jumper setting value.................... : 0x0000
    

复制代码