ST3500312CS-SC13-9VVJ5ZTP-100535704-REVD-59-01-0-1

Sunny · 发表于 2016-12-20 10:39:44

ST3500312CS-SC13-9VVJ5ZTP-100535704-REVD-59-01-0-1
100535704 REVD

HDD family detecting...
Family ID: 40
Selected family......................... : 40, Hepburn
Model by ID............................. : ST3500312CS
Loading default settings!
Use the options dialog to review and save utility settings.
Then press OK!
Family default settings loading!
Tech Key...
Requesting FW Pkg ver ........ HE0D2D.SDC1.HZ01DZ.SC13
Detecting Phys Sct Size...
Result.................................. : 512
Detecting Max Head number...
Phys. heads............................. : 2
Obtaining Saved Mode Pages File information...
Reading Saved Mode Pages...
Parsing Saved Mode Pages...
SMP Dbl: 0x3C000317 - 0x037FF7FF (0x0000000F)
LBA alignment........................... : 0
Obtaining Registry File information...
Reading Registry File...
Parsing Registry File...
Media Cache
===========
MC is not supported / NVC caching
Collecting Sys Files information...
ID Len
===============
0 4 Reserved Defect Table (SA defect table)
1 2 Drive Information File (DIF)
2 16 Performance Parameter File (PPF)
3 3787 Primary Defect File (P-List))
4 12 Servo Adaptive Parameter File (SAP)
5 4 Manufacturing Information File (MIF)
6 66 Read Adaptive Parameters File (RAP)
7 1 Controller Adaptive Parameters File (CAP)
8 4800
9 1 SMART Configuration File
A 2251 SMART Data File
B 1000
C 64000 Serial Port Test Results File (Self Scan Log)
D 160
E 432 Data Integrity Check (DIC), HEAD 0
F 223 DIC Dummy File
13 8 Disc Registry File (settings, security, etc)
15 100 BGMS File (Directed Offline Scan)
16 2
17 40
19 24 Log File
1A 33 Log File
1B 1 Log File
1C 9
1D 128 Physical Overlay File 0
1E 128 Physical Overlay File 1
1F 640 Physical Overlay File 2
22 80 Drive Self Test (DST), Head 0
23 80 Drive Self Test (DST), Head 1
2A 9 Saved Mode Pages (HDD settings)
2B 1172 R/W Operating Parameters (translator, etc)
2C 432 Data Integrity Check (DIC), HEAD 1
33 4576
34 640 Packed CONGEN XML definition
35 26 SMART Data
3A 4
Collecting Sys File Infos completed
Collecting DT Infos...
ROM:
ID MemOffs Len
===========================
0 6037200 33792 Read Adaptive Parameters File (RAP)
1 6037000 512 Controller Adaptive Parameters File (CAP)
4 4002C00 4096 Servo Adaptive Parameter File (SAP)
602BE00 4096
total 8192
5 6C000 81920 Servo Firmware Table
A 60B2CA4 2048 Seek Profile
13 60BEF68 864 Dependent Zone Table for User Area
14 60BF2C8 96 Dependent Zone Table for System Area
15 0 524288 Flash ROM
1B 60BCD6C 8700 Dependent Zone Group Tables for User Area
1C 60BCC2C 320 Dependent Zone Group Tables for System Area
1D 6037220 352 VBAR Configuration File
1E 60374B0 2416 Zone Format Parameters File
RAM:
ID MemOffs Len
===========================
0 6037200 33792 Read Adaptive Parameters File (RAP)
1 6037000 512 Controller Adaptive Parameters File (CAP)
2 6037380 304 Zone Table
4 4002C00 4096 Servo Adaptive Parameter File (SAP)
602BE00 4096
total 8192
5 6C000 81920 Servo Firmware Table
6 26FE44 40996 Servo Flaw Table
A 60B2CA4 2048 Seek Profile
13 60BEF68 864 Dependent Zone Table for User Area
14 60BF2C8 96 Dependent Zone Table for System Area
15 0 524288 Flash ROM
16 6037200 32 Drive Configuration Table
17 6039240 1216 Temperature Control Configuration
1B 60BCD6C 8700 Dependent Zone Group Tables for User Area
1C 60BCC2C 320 Dependent Zone Group Tables for System Area
1D 6037220 352 VBAR Configuration File
1E 60374B0 2416 Zone Format Parameters File
1F 618467C 1224 RW working user preamp table
20 6184B44 72 RW working system preamp table
Collecting DT Infos completed
Reading autotuning buffer............... Ok
Searching module table in RAM... ....... Ok
Searching volume 3 file table in RAM.... Ok
Searching volume 0 file table in RAM.... Ok
Searching SMP RAM FID in RAM............ Ok
Searching Non Resident G-List FID in RAM Ok
Searching CFW OVL FID in RAM............ Ok
Searching DT table(RAM, WR) in RAM...... Ok
Searching DT table(RAM, RD) in RAM...... Ok
System Files I/O method detection... ATA(direct)
Test : HDD resources backup
Folder: G:\Program Files (x86)\!Profiles\SgF3\Hepburn\ST3500312CS-SC13-9VVJ5ZTP-100535704-REVD-59-01-0-1\Data\SABackup\
Reading ROM to profile folder
Folder: G:\Program Files (x86)\!Profiles\SgF3\Hepburn\ST3500312CS-SC13-9VVJ5ZTP-100535704-REVD-59-01-0-1\Data\SABackup\ROM\
Result.................................. : Ok
Reading DT to profile folder
Folder: G:\Program Files (x86)\!Profiles\SgF3\Hepburn\ST3500312CS-SC13-9VVJ5ZTP-100535704-REVD-59-01-0-1\Data\SABackup\CPDir\
DT 0000 (Flash ROM), Read Adaptive Parameters File (RAP).............. : Ok
DT 0001 (Flash ROM), Controller Adaptive Parameters File (CAP)........ : Ok
DT 0004 (Flash ROM), Servo Adaptive Parameter File (SAP).............. : Ok
DT 0005 (Flash ROM), Servo Firmware Table............................. : Ok
DT 000A (Flash ROM), Seek Profile..................................... : Ok
DT 0013 (Flash ROM), Dependent Zone Table for User Area............... : Ok
DT 0014 (Flash ROM), Dependent Zone Table for System Area............. : Ok
DT 0015 (Flash ROM), Flash ROM........................................ : Ok
DT 001B (Flash ROM), Dependent Zone Group Tables for User Area........ : Ok
DT 001C (Flash ROM), Dependent Zone Group Tables for System Area...... : Ok
DT 001D (Flash ROM), VBAR Configuration File.......................... : Ok
DT 001E (Flash ROM), Zone Format Parameters File...................... : Ok
DT 0000 (RAM), Read Adaptive Parameters File (RAP).................... : Ok
DT 0001 (RAM), Controller Adaptive Parameters File (CAP).............. : Ok
DT 0002 (RAM), Zone Table............................................. : Ok
DT 0004 (RAM), Servo Adaptive Parameter File (SAP).................... : Ok
DT 0005 (RAM), Servo Firmware Table................................... : Ok
DT 0006 (RAM), Servo Flaw Table....................................... : Ok
DT 000A (RAM), Seek Profile........................................... : Ok
DT 0013 (RAM), Dependent Zone Table for User Area..................... : Ok
DT 0014 (RAM), Dependent Zone Table for System Area................... : Ok
DT 0015 (RAM), Flash ROM.............................................. : Ok
DT 0016 (RAM), Drive Configuration Table.............................. : Ok
DT 0017 (RAM), Temperature Control Configuration...................... : Ok
DT 001B (RAM), Dependent Zone Group Tables for User Area.............. : Ok
DT 001C (RAM), Dependent Zone Group Tables for System Area............ : Ok
DT 001D (RAM), VBAR Configuration File................................ : Ok
DT 001E (RAM), Zone Format Parameters File............................ : Ok
DT 001F (RAM), RW working user preamp table........................... : Ok
DT 0020 (RAM), RW working system preamp table......................... : Ok
DT reading process completed
Result.................................. : Ok
Reading modules to profile folder
Folder: G:\Program Files (x86)\!Profiles\SgF3\Hepburn\ST3500312CS-SC13-9VVJ5ZTP-100535704-REVD-59-01-0-1\Data\SABackup\ModDir\
Module 0000, Reserved Defect Table (SA defect table).................. : Ok
Module 0001, Drive Information File (DIF)............................. : Ok
Module 0002, Performance Parameter File (PPF)......................... : Ok
Module 0003, Primary Defect File (P-List))............................ : Ok
Module 0004, Servo Adaptive Parameter File (SAP)...................... : Ok
Module 0005, Manufacturing Information File (MIF)..................... : Ok
Module 0006, Read Adaptive Parameters File (RAP)...................... : Ok
Module 0007, Controller Adaptive Parameters File (CAP)................ : Ok
Module 0008........................................................... : Ok
Module 0009, SMART Configuration File................................. : Ok
Module 000A, SMART Data File.......................................... : Ok
Module 000B........................................................... : Ok
Module 000C, Serial Port Test Results File (Self Scan Log)............ : Ok
Module 000D........................................................... : Ok
Module 000E, Data Integrity Check (DIC), HEAD 0....................... : Ok
Module 000F, DIC Dummy File........................................... : Ok
Module 0013, Disc Registry File (settings, security, etc)............. : Ok
Module 0015, BGMS File (Directed Offline Scan)........................ : Ok
Module 0016........................................................... : Ok
Module 0017........................................................... : Ok
Module 0019, Log File................................................. : Ok
Module 001A, Log File................................................. : Ok
Module 001B, Log File................................................. : Ok
Module 001C........................................................... : Ok
Module 001D, Physical Overlay File 0.................................. : Ok
Module 001E, Physical Overlay File 1.................................. : Ok
Module 001F, Physical Overlay File 2.................................. : Ok
Module 0022, Drive Self Test (DST), Head 0............................ : Ok
Module 0023, Drive Self Test (DST), Head 1............................ : Ok
Module 002A, Saved Mode Pages (HDD settings).......................... : Ok
Module 002B, R/W Operating Parameters (translator, etc)............... : Ok
Module 002C, Data Integrity Check (DIC), HEAD 1....................... : Ok
Module 0033........................................................... : Ok
Module 0034, Packed CONGEN XML definition............................. : Ok
Module 0035, SMART Data............................................... : Ok
Module 003A........................................................... : Ok
Modules reading process completed
Reading HDD ID pages list...
Reading HDD ID pages...
ID Page 00............................................................ : Ok
ID Page 01............................................................ : Ok
ID Page 02............................................................ : Ok
ID Page 03............................................................ : Ok
ID Page 04............................................................ : Ok
ID Page 08............................................................ : Ok
ID Page 09............................................................ : Ok
ID Page 0A............................................................ : Ok
ID Page 0B............................................................ : Ok
ID Page 0C............................................................ : Ok
ID Page 0D............................................................ : Ok
ID Page 0E............................................................ : Ok
ID Page 0F............................................................ : Ok
Reading System Files to profile folder
Folder: G:\Program Files (x86)\!Profiles\SgF3\Hepburn\ST3500312CS-SC13-9VVJ5ZTP-100535704-REVD-59-01-0-1\Data\SABackup\SysFiles\
Copies : 0 1
Sys File FC000000(0), Reserved Defect Table (SA defect table)......... : Ok
Sys File FC000000(1), Reserved Defect Table (SA defect table)......... : Ok
Sys File FC001203(0).................................................. : Ok
Sys File FC001203(1).................................................. : Ok
Sys File FC002204(0).................................................. : Ok
Sys File FC002204(1).................................................. : Ok
Sys File FC003205(0).................................................. : Ok
Sys File FC003205(1).................................................. : Ok
Sys File FC004206(0).................................................. : Ok
Sys File FC004206(1).................................................. : Ok
Sys File FC00520C(0).................................................. : Ok
Sys File FC00520C(1).................................................. : Ok
Sys File FC00620D(0).................................................. : Ok
Sys File FC00620D(1).................................................. : Ok
Sys File FC00720E(0).................................................. : Ok
Sys File FC00720E(1).................................................. : Ok
Sys File FC34501B(0), Primary Defect File (P-List))................... : Ok
Sys File FC34501B(1), Primary Defect File (P-List))................... : Ok
Sys File FC34D028(0), R/W Operating Parameters (translator, etc)...... : Ok
Sys File FC34D028(1), R/W Operating Parameters (translator, etc)...... : Ok
Sys File FC34F035(0).................................................. : Ok
Sys File FC34F035(1).................................................. : Ok
Sys File FC355100(0), Physical Overlay File 0......................... : Ok
Sys File FC355100(1), Physical Overlay File 0......................... : Ok
Sys File FC356101(0), Physical Overlay File 1......................... : Ok
Sys File FC356101(1), Physical Overlay File 1......................... : Ok
Sys File FC357102(0), Physical Overlay File 2......................... : Ok
Sys File FC357102(1), Physical Overlay File 2......................... : Ok
Sys File FC358103(0).................................................. : Ok
Sys File FC358103(1).................................................. : Ok
Sys File FC359104(0).................................................. : Ok
Sys File FC359104(1).................................................. : Ok
Sys File FC35A105(0).................................................. : Ok
Sys File FC35A105(1).................................................. : Ok
Sys File FC35B106(0).................................................. : Ok
Sys File FC35B106(1).................................................. : Ok
Sys File FC35C107(0).................................................. : Ok
Sys File FC35C107(1).................................................. : Ok
Sys File FC35D108(0).................................................. : Ok
Sys File FC35D108(1).................................................. : Ok
Sys File FC35E109(0).................................................. : Ok
Sys File FC35E109(1).................................................. : Ok
Sys File FC35F10A(0).................................................. : Ok
Sys File FC35F10A(1).................................................. : Ok
Sys File FC36010B(0).................................................. : Ok
Sys File FC36010B(1).................................................. : Ok
Sys File FC36110C(0).................................................. : Ok
Sys File FC36110C(1).................................................. : Ok
Sys File FC36210D(0).................................................. : Ok
Sys File FC36210D(1).................................................. : Ok
Sys File FC363110(0).................................................. : Ok
Sys File FC363110(1).................................................. : Ok
System Files reading process completed
Reading loader data to folder (LDR)
Scanning LOD files...
reading file FC00620D...
reading file FC355100...
Appending: Overlay ID = 00
reading file FC356101...
Appending: Overlay ID = 01
reading file FC357102...
reading file FC358103...
Appending: Overlay ID = 04
reading file FC359104...
Appending: Overlay ID = 05
reading file FC35A105...
reading file FC35B106...
reading file FC35C107...
reading file FC35D108...
reading file FC35E109...
reading file FC35F10A...
reading file FC36010B...
reading file FC36110C...
reading file FC36210D...
Backup of service information completed

复制代码

Sunny · 发表于 2016-12-20 10:40:03

HDD family detecting...

Family ID: 40
Selected family......................... : 40, Hepburn
Model by ID............................. : ST3500312CS

Loading default settings!
Use the options dialog to review and save utility settings.
Then press OK!

Family default settings loading!

Tech Key...

Requesting FW Pkg ver ........ HE0D2D.SDC1.HZ01DZ.SC13

Detecting Phys Sct Size...
Result.................................. : 512

Detecting Max Head number...
Phys. heads............................. : 2

Obtaining Saved Mode Pages File information...
Reading Saved Mode Pages...
Parsing Saved Mode Pages...
SMP Dbl: 0x3C000317 - 0x037FF7FF (0x0000000F)

LBA alignment........................... : 0

Obtaining Registry File information...
Reading Registry File...
Parsing Registry File...

Media Cache
===========
MC is not supported / NVC caching

Collecting Sys Files information...
  ID       Len
===============
0       4  Reserved Defect Table (SA defect table)
1       2  Drive Information File (DIF)
2       16  Performance Parameter File (PPF)
3    3787  Primary Defect File (P-List))
4       12  Servo Adaptive Parameter File (SAP)
5       4  Manufacturing Information File (MIF)
6       66  Read Adaptive Parameters File (RAP)
7       1  Controller Adaptive Parameters File (CAP)
8    4800
9       1  SMART Configuration File
A    2251  SMART Data File
B    1000
C    64000  Serial Port Test Results File (Self Scan Log)
D       160
E       432  Data Integrity Check (DIC), HEAD 0
F       223  DIC Dummy File
  13       8  Disc Registry File (settings, security, etc)
  15       100  BGMS File (Directed Offline Scan)
  16       2
  17       40
  19       24  Log File
  1A       33  Log File
  1B       1  Log File
  1C       9
  1D       128  Physical Overlay File 0
  1E       128  Physical Overlay File 1
  1F       640  Physical Overlay File 2
  22       80  Drive Self Test (DST), Head 0
  23       80  Drive Self Test (DST), Head 1
  2A       9  Saved Mode Pages (HDD settings)
  2B    1172  R/W Operating Parameters (translator, etc)
  2C       432  Data Integrity Check (DIC), HEAD 1
  33    4576
  34       640  Packed CONGEN XML definition
  35       26  SMART Data
  3A       4
Collecting Sys File Infos completed

Collecting DT Infos...
ROM:
  ID    MemOffs       Len
===========================
0    6037200    33792  Read Adaptive Parameters File (RAP)
1    6037000       512  Controller Adaptive Parameters File (CAP)
4    4002C00    4096  Servo Adaptive Parameter File (SAP)
      602BE00    4096
            total 8192
5    6C000    81920  Servo Firmware Table
A    60B2CA4    2048  Seek Profile
  13    60BEF68       864  Dependent Zone Table for User Area
  14    60BF2C8       96  Dependent Zone Table for System Area
  15          0    524288  Flash ROM
  1B    60BCD6C    8700  Dependent Zone Group Tables for User Area
  1C    60BCC2C       320  Dependent Zone Group Tables for System Area
  1D    6037220       352  VBAR Configuration File
  1E    60374B0    2416  Zone Format Parameters File

RAM:
  ID    MemOffs       Len
===========================
0    6037200    33792  Read Adaptive Parameters File (RAP)
1    6037000       512  Controller Adaptive Parameters File (CAP)
2    6037380       304  Zone Table
4    4002C00    4096  Servo Adaptive Parameter File (SAP)
      602BE00    4096
            total 8192
5    6C000    81920  Servo Firmware Table
6    26FE44    40996  Servo Flaw Table
A    60B2CA4    2048  Seek Profile
  13    60BEF68       864  Dependent Zone Table for User Area
  14    60BF2C8       96  Dependent Zone Table for System Area
  15          0    524288  Flash ROM
  16    6037200       32  Drive Configuration Table
  17    6039240    1216  Temperature Control Configuration
  1B    60BCD6C    8700  Dependent Zone Group Tables for User Area
  1C    60BCC2C       320  Dependent Zone Group Tables for System Area
  1D    6037220       352  VBAR Configuration File
  1E    60374B0    2416  Zone Format Parameters File
  1F    618467C    1224  RW working user preamp table
  20    6184B44       72  RW working system preamp table

Collecting DT Infos completed

Reading autotuning buffer............... Ok
Searching module table in RAM... ....... Ok
Searching volume 3 file table in RAM.... Ok
Searching volume 0 file table in RAM.... Ok
Searching SMP RAM FID in RAM............ Ok
Searching Non Resident G-List FID in RAM Ok
Searching CFW OVL FID in RAM............ Ok
Searching DT table(RAM, WR) in RAM...... Ok
Searching DT table(RAM, RD) in RAM...... Ok

System Files I/O method detection... ATA(direct)

Test  : HDD resources backup
Folder: G:\Program Files (x86)\!Profiles\SgF3\Hepburn\ST3500312CS-SC13-9VVJ5ZTP-100535704-REVD-59-01-0-1\Data\SABackup\

Reading ROM to profile folder
Folder: G:\Program Files (x86)\!Profiles\SgF3\Hepburn\ST3500312CS-SC13-9VVJ5ZTP-100535704-REVD-59-01-0-1\Data\SABackup\ROM\
Result.................................. : Ok

Reading DT to profile folder
Folder: G:\Program Files (x86)\!Profiles\SgF3\Hepburn\ST3500312CS-SC13-9VVJ5ZTP-100535704-REVD-59-01-0-1\Data\SABackup\CPDir\

DT 0000 (Flash ROM), Read Adaptive Parameters File (RAP).............. : Ok
DT 0001 (Flash ROM), Controller Adaptive Parameters File (CAP)........ : Ok
DT 0004 (Flash ROM), Servo Adaptive Parameter File (SAP).............. : Ok
DT 0005 (Flash ROM), Servo Firmware Table............................. : Ok
DT 000A (Flash ROM), Seek Profile..................................... : Ok
DT 0013 (Flash ROM), Dependent Zone Table for User Area............... : Ok
DT 0014 (Flash ROM), Dependent Zone Table for System Area............. : Ok
DT 0015 (Flash ROM), Flash ROM........................................ : Ok
DT 001B (Flash ROM), Dependent Zone Group Tables for User Area........ : Ok
DT 001C (Flash ROM), Dependent Zone Group Tables for System Area...... : Ok
DT 001D (Flash ROM), VBAR Configuration File.......................... : Ok
DT 001E (Flash ROM), Zone Format Parameters File...................... : Ok
DT 0000 (RAM), Read Adaptive Parameters File (RAP).................... : Ok
DT 0001 (RAM), Controller Adaptive Parameters File (CAP).............. : Ok
DT 0002 (RAM), Zone Table............................................. : Ok
DT 0004 (RAM), Servo Adaptive Parameter File (SAP).................... : Ok
DT 0005 (RAM), Servo Firmware Table................................... : Ok
DT 0006 (RAM), Servo Flaw Table....................................... : Ok
DT 000A (RAM), Seek Profile........................................... : Ok
DT 0013 (RAM), Dependent Zone Table for User Area..................... : Ok
DT 0014 (RAM), Dependent Zone Table for System Area................... : Ok
DT 0015 (RAM), Flash ROM.............................................. : Ok
DT 0016 (RAM), Drive Configuration Table.............................. : Ok
DT 0017 (RAM), Temperature Control Configuration...................... : Ok
DT 001B (RAM), Dependent Zone Group Tables for User Area.............. : Ok
DT 001C (RAM), Dependent Zone Group Tables for System Area............ : Ok
DT 001D (RAM), VBAR Configuration File................................ : Ok
DT 001E (RAM), Zone Format Parameters File............................ : Ok
DT 001F (RAM), RW working user preamp table........................... : Ok
DT 0020 (RAM), RW working system preamp table......................... : Ok
DT reading process completed
Result.................................. : Ok

Reading modules to profile folder
Folder: G:\Program Files (x86)\!Profiles\SgF3\Hepburn\ST3500312CS-SC13-9VVJ5ZTP-100535704-REVD-59-01-0-1\Data\SABackup\ModDir\

Module 0000, Reserved Defect Table (SA defect table).................. : Ok
Module 0001, Drive Information File (DIF)............................. : Ok
Module 0002, Performance Parameter File (PPF)......................... : Ok
Module 0003, Primary Defect File (P-List))............................ : Ok
Module 0004, Servo Adaptive Parameter File (SAP)...................... : Ok
Module 0005, Manufacturing Information File (MIF)..................... : Ok
Module 0006, Read Adaptive Parameters File (RAP)...................... : Ok
Module 0007, Controller Adaptive Parameters File (CAP)................ : Ok
Module 0008........................................................... : Ok
Module 0009, SMART Configuration File................................. : Ok
Module 000A, SMART Data File.......................................... : Ok
Module 000B........................................................... : Ok
Module 000C, Serial Port Test Results File (Self Scan Log)............ : Ok
Module 000D........................................................... : Ok
Module 000E, Data Integrity Check (DIC), HEAD 0....................... : Ok
Module 000F, DIC Dummy File........................................... : Ok
Module 0013, Disc Registry File (settings, security, etc)............. : Ok
Module 0015, BGMS File (Directed Offline Scan)........................ : Ok
Module 0016........................................................... : Ok
Module 0017........................................................... : Ok
Module 0019, Log File................................................. : Ok
Module 001A, Log File................................................. : Ok
Module 001B, Log File................................................. : Ok
Module 001C........................................................... : Ok
Module 001D, Physical Overlay File 0.................................. : Ok
Module 001E, Physical Overlay File 1.................................. : Ok
Module 001F, Physical Overlay File 2.................................. : Ok
Module 0022, Drive Self Test (DST), Head 0............................ : Ok
Module 0023, Drive Self Test (DST), Head 1............................ : Ok
Module 002A, Saved Mode Pages (HDD settings).......................... : Ok
Module 002B, R/W Operating Parameters (translator, etc)............... : Ok
Module 002C, Data Integrity Check (DIC), HEAD 1....................... : Ok
Module 0033........................................................... : Ok
Module 0034, Packed CONGEN XML definition............................. : Ok
Module 0035, SMART Data............................................... : Ok
Module 003A........................................................... : Ok
Modules reading process completed

Reading HDD ID pages list...
Reading HDD ID pages...
ID Page 00............................................................ : Ok
ID Page 01............................................................ : Ok
ID Page 02............................................................ : Ok
ID Page 03............................................................ : Ok
ID Page 04............................................................ : Ok
ID Page 08............................................................ : Ok
ID Page 09............................................................ : Ok
ID Page 0A............................................................ : Ok
ID Page 0B............................................................ : Ok
ID Page 0C............................................................ : Ok
ID Page 0D............................................................ : Ok
ID Page 0E............................................................ : Ok
ID Page 0F............................................................ : Ok

Reading System Files to profile folder
Folder: G:\Program Files (x86)\!Profiles\SgF3\Hepburn\ST3500312CS-SC13-9VVJ5ZTP-100535704-REVD-59-01-0-1\Data\SABackup\SysFiles\
Copies : 0 1

Sys File FC000000(0), Reserved Defect Table (SA defect table)......... : Ok
Sys File FC000000(1), Reserved Defect Table (SA defect table)......... : Ok
Sys File FC001203(0).................................................. : Ok
Sys File FC001203(1).................................................. : Ok
Sys File FC002204(0).................................................. : Ok
Sys File FC002204(1).................................................. : Ok
Sys File FC003205(0).................................................. : Ok
Sys File FC003205(1).................................................. : Ok
Sys File FC004206(0).................................................. : Ok
Sys File FC004206(1).................................................. : Ok
Sys File FC00520C(0).................................................. : Ok
Sys File FC00520C(1).................................................. : Ok
Sys File FC00620D(0).................................................. : Ok
Sys File FC00620D(1).................................................. : Ok
Sys File FC00720E(0).................................................. : Ok
Sys File FC00720E(1).................................................. : Ok
Sys File FC34501B(0), Primary Defect File (P-List))................... : Ok
Sys File FC34501B(1), Primary Defect File (P-List))................... : Ok
Sys File FC34D028(0), R/W Operating Parameters (translator, etc)...... : Ok
Sys File FC34D028(1), R/W Operating Parameters (translator, etc)...... : Ok
Sys File FC34F035(0).................................................. : Ok
Sys File FC34F035(1).................................................. : Ok
Sys File FC355100(0), Physical Overlay File 0......................... : Ok
Sys File FC355100(1), Physical Overlay File 0......................... : Ok
Sys File FC356101(0), Physical Overlay File 1......................... : Ok
Sys File FC356101(1), Physical Overlay File 1......................... : Ok
Sys File FC357102(0), Physical Overlay File 2......................... : Ok
Sys File FC357102(1), Physical Overlay File 2......................... : Ok
Sys File FC358103(0).................................................. : Ok
Sys File FC358103(1).................................................. : Ok
Sys File FC359104(0).................................................. : Ok
Sys File FC359104(1).................................................. : Ok
Sys File FC35A105(0).................................................. : Ok
Sys File FC35A105(1).................................................. : Ok
Sys File FC35B106(0).................................................. : Ok
Sys File FC35B106(1).................................................. : Ok
Sys File FC35C107(0).................................................. : Ok
Sys File FC35C107(1).................................................. : Ok
Sys File FC35D108(0).................................................. : Ok
Sys File FC35D108(1).................................................. : Ok
Sys File FC35E109(0).................................................. : Ok
Sys File FC35E109(1).................................................. : Ok
Sys File FC35F10A(0).................................................. : Ok
Sys File FC35F10A(1).................................................. : Ok
Sys File FC36010B(0).................................................. : Ok
Sys File FC36010B(1).................................................. : Ok
Sys File FC36110C(0).................................................. : Ok
Sys File FC36110C(1).................................................. : Ok
Sys File FC36210D(0).................................................. : Ok
Sys File FC36210D(1).................................................. : Ok
Sys File FC363110(0).................................................. : Ok
Sys File FC363110(1).................................................. : Ok
System Files reading process completed

Reading loader data to folder (LDR)
Scanning LOD files...
reading file FC00620D...
reading file FC355100...
Appending: Overlay ID = 00
reading file FC356101...
Appending: Overlay ID = 01
reading file FC357102...
reading file FC358103...
Appending: Overlay ID = 04
reading file FC359104...
Appending: Overlay ID = 05
reading file FC35A105...
reading file FC35B106...
reading file FC35C107...
reading file FC35D108...
reading file FC35E109...
reading file FC35F10A...
reading file FC36010B...
reading file FC36110C...
reading file FC36210D...

Backup of service information completed

Sunny · 发表于 2016-12-20 10:40:39

ASCII Diag mode
F3 T>
HighPowerMode 0027
Package Version: HE0D2D.SDC1.HZ01DZ.SC13 , Package P/N: 100694896, Package Builder ID: Z3,
Package Build Date: 11/18/2011, Package Build Time: 10:10:12, Package CFW Version: HE0D.SDC1.00399737.Z300,
Package SFW1 Version: D290, Package SFW2 Version: ----, Package SFW3 Version: ----, Package SFW4 Version: ----
Controller FW Rev: 11181010, CustomerRel: SC13, Changelist: 00399737, ProdType: HE0D.SDC1, Date: 11/18/2011, Time: 101012, UserId: 00446535
Servo FW Rev: D290
RAP FW Implementation Key: 10, Format Rev: 0001, Contents Rev: A1 07 04 03
Hepburn VTPI/RAP16,128K dfcts,5K srvo,Yeti3,5900rpm CE
Product FamilyId: 40, MemberId: 05
HDA SN: 9VVJ5ZTP, RPM: 5893, Wedges: 160, Heads: 2, Lbas: 3A386030, PreampType: 59 01
PCBA SN: 0000C521BYZP, Controller: YETIST_3_0(64A1)(3-12-4-1), Channel: AGERE_COPPERHEAD_LITE, PowerAsic: MCKINLEY DESKTOP LITE Rev 15, BufferBytes: 800000
Package Version: HE0D2D.SDC1.HZ01DZ.SC13 , Package P/N: 100694896, Package Builder ID: Z3,
Package Build Date: 11/18/2011, Package Build Time: 10:10:12, Package CFW Version: HE0D.SDC1.00399737.Z300,
Package SFW1 Version: D290, Package SFW2 Version: ----, Package SFW3 Version: ----, Package SFW4 Version: ----
Controller FW Rev: 11181010, CustomerRel: SC13, Changelist: 00399737, ProdType: HE0D.SDC1, Date: 11/18/2011, Time: 101012, UserId: 00446535
Servo FW Rev: D290
RAP FW Implementation Key: 10, Format Rev: 0001, Contents Rev: A1 07 04 03
Features:
- Quadradic Equation AFH enabled
- VBAR with adjustable zone boundaries enabled
- Volume Based Sparing enabled
- IOEDC enabled
- IOECC enabled
- DERP Read Retries enabled
- LTTC-UDR2 disabled

复制代码

ASCII Diag mode

F3 T>
HighPowerMode 0027
Package Version: HE0D2D.SDC1.HZ01DZ.SC13 , Package P/N: 100694896, Package Builder ID: Z3,
Package Build Date: 11/18/2011, Package Build Time: 10:10:12, Package CFW Version: HE0D.SDC1.00399737.Z300,
Package SFW1 Version: D290, Package SFW2 Version: ----, Package SFW3 Version: ----, Package SFW4 Version: ----
Controller FW Rev: 11181010, CustomerRel: SC13, Changelist: 00399737, ProdType: HE0D.SDC1, Date: 11/18/2011, Time: 101012, UserId: 00446535
Servo FW Rev: D290
RAP FW Implementation Key: 10, Format Rev: 0001, Contents Rev: A1 07 04 03
Hepburn VTPI/RAP16,128K dfcts,5K srvo,Yeti3,5900rpm CE
Product FamilyId: 40, MemberId: 05
HDA SN: 9VVJ5ZTP, RPM: 5893, Wedges: 160, Heads: 2, Lbas: 3A386030, PreampType: 59 01
PCBA SN: 0000C521BYZP, Controller: YETIST_3_0(64A1)(3-12-4-1), Channel: AGERE_COPPERHEAD_LITE, PowerAsic: MCKINLEY DESKTOP LITE Rev 15, BufferBytes: 800000
Package Version: HE0D2D.SDC1.HZ01DZ.SC13 , Package P/N: 100694896, Package Builder ID: Z3,
Package Build Date: 11/18/2011, Package Build Time: 10:10:12, Package CFW Version: HE0D.SDC1.00399737.Z300,
Package SFW1 Version: D290, Package SFW2 Version: ----, Package SFW3 Version: ----, Package SFW4 Version: ----
Controller FW Rev: 11181010, CustomerRel: SC13, Changelist: 00399737, ProdType: HE0D.SDC1, Date: 11/18/2011, Time: 101012, UserId: 00446535
Servo FW Rev: D290
RAP FW Implementation Key: 10, Format Rev: 0001, Contents Rev: A1 07 04 03
Features:
- Quadradic Equation AFH enabled
- VBAR with adjustable zone boundaries enabled
- Volume Based Sparing enabled
- IOEDC enabled
- IOECC enabled
- DERP Read Retries enabled
- LTTC-UDR2 disabled

		自动登录	找回密码
密码			立即注册

ST3500312CS-SC13-9VVJ5ZTP-100535704-REVD-59-01-0-1

本帖子中包含更多资源